Anmol Chemicals is the pioneer manufacturers of Potassium Bromide, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Potassium Bromide made in an ISO9001:2008, ISO22000:2005 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Potassium Bromide is in these pages. The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal
Potassium Bromide BP USP IP Manufactures
English Potassium Bromide
Arabic بروميد البوتاسيوم النقي الدوائية والمصنوعات الصف
German Kalium Bromid pur & Pharma Grade Hersteller
Italian Bromuro di potassio puro & pharmaceutical grade produce
Spanish Bromuro de potasio puro & farmacéutica fabrica de grado
Dutch Kalium Bromide Pure & farmaceutische kwaliteit produceert
Portuguese Brometo de potássio puro & farmacêutica fabrica de grau
French Bromure de potassium pur & pharmaceutique fabrique de Grade
Potassium Bromide BP USP IP Grade Manufacturers
MSDS of Potassium Bromide Manufacturers
Potassium Bromide BP
98.0 per cent to 100.5 per cent (dried substance).
White or almost white, crystalline powder or colourless crystals.
Freely soluble in water and in glycerol, slightly soluble in alcohol.
A. It gives reaction of bromides.
B. Solution S (see Tests) gives the reactions of potassium.
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 10 ml of solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
To 10 ml of solution S add 1 ml of starch solution R, 0.1 ml of a 100 g/l solution of potassium iodide and 0.25 ml of 0.5 M sulphuric acid and allow to stand protected from light for 5 min. No blue or violet colour develops.
Maximum 0.6 per cent.
To 5 ml of solution S add 0.15 ml of ferric chloride solution and 2 ml of methylene chloride.
Shake and allow to separate. The lower layer is colourless.
Maximum 100 ppm.
Maximum 20 ppm.
Magnesium and alkaline-earth metals
Maximum 200 ppm, calculated as Ca.
Maximum 10 ppm.
Loss on drying
Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3h.
Potassium Bromide USP
Potassium Bromide contains not less than 98.0 percent and not more than 100.5 percent of KBr, calculated on the dried basis. It contains no added substances.
Appearance of solution: clear and colorless.
Test solution— Dissolve 10.0 g in carbon dioxide-free water, and dilute with the same solvent to 100 mL.
A: A solution containing 4.5 mg of potassium bromide responds to the test for Bromide.
B: Responds to the test for Potassium.
Acidity or alkalinity— To 10 mL of the solution prepared for the test for Appearance of solution, add 0.1 mL of bromothymol blue TS: not more than 0.5 mL of 0.01 N hydrochloric acid or 0.01 N sodium hydroxide is required to change the color of this solution.
Loss on drying— Dry it at 100 to 105 for 3 hours: it loses not more than 1.0% of its weight.
Starch–mercuric iodide solution— Triturate 1.0 g of soluble starch with 5 mL of water and pour the mixture into 100 mL of boiling water, containing 10 mg of mercuric iodide.
Procedure— To 10 mL of the solution prepared for the test for Appearance of solution add 1 mL of Starch–mercuric iodide solution, 0.1 mL of a 100 g per L solution of potassium iodide, and 0.25 mL of 0.5 M sulfuric acid. Allow to stand protected from light for 5 minutes: no blue or violet color develops.
Limit of chlorine: not more than 0.6%.
Iodides— To 5 mL of the solution prepared for the test for Appearance of solution add 0.15 mL of a 10.5 g per 100 mL ferric chloride solution, and 2 mL of dichloromethane. Shake, and allow to separate. The lower layer is colorless.
Sulfates— A 2.0-g portion shows no more sulfate than corresponds to 0.2 mL of 0.020 N sulfuric acid (0.01%).
Limit of iron: not more than 20 ppm.
Magnesium and alkaline-earth metals— (0.02%, calculated as Ca).
Heavy metals: not more than 10 ppm.
Potassium Bromide BP USP Manufacturers:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264
Aluminum chloride -- Aluminium chloride -- Ammonium persulfate -- Ammonium bromide -- Ammonium sulfate -- Ammonium phosphate monobasic dibasic -- Barium chloride -- Borax Calcium phosphate -- Calcium propionate -- Copper sulfate sulphate -- Sodium Borate -- Calcium saccharate -- Ceric ammonium nitrate -- Cupric chloride -- Calcium Hydroxide -- Citric acid -- Isatoic anhydride -- Magnesium sulfate -- Maleic acid -- Manganese Sulfate -- Methylene blue -- Potassium phosphate monobasic dibasic tribasic -- Potassium acetate -- Potassium bromide -- Sodium formaldehyde bisulfite -- Sodium bromide -- Sodium diacetate -- Sodium Bicarbonate -- Sodium hydroxide pellets, Potassium hydroxide pellets -- Sodium Phosphate monobasic dibasic tribasic --
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan,etc.
Copyright and Usual Disclaimer is Applicable. 5 March, 2016